The advantage of Integrated Turntable structure
Our machine uses Integrated Turntable structure design,A large-scale gantry machining center is used for one-time forming to ensure the concentricity of the turntable and improve the running stability of the host, the processing is complicated.
2. The advantage of Oil cylinder
Our Oil cylinder uses Plug-in design, integral piston, tin bronze guide,In view of the shortcomings of the integrated oil cylinder turntable design, the oil cylinder plug-in design is adopted to reduce equipment maintenance costs.
3. The advantage of Screw Extrusion Structure
Our Screw Extrusion Structure adopts Special screw design, length to diameter ratio 32: 1 (according to different raw material characteristics, professional design);The screw is formed by alloy sintering and grinding which is uniform mixing, better plasticizing ability, not easy to wear.
4.The advantage of Intelligent temperature control extrusion system
Intelligent temperature control extrusion system adopts multi-stage temperature control, uniform heating, temperature difference of ± 1 ° C, high thermal efficiency, and good uniform plasticizing ability.
5. The advantage of Hydraulic station
Hydraulic station adopts imported oil pump and Yuken control valve, etc,which is high precision, high quality, durable.
7.The advantage of moulds
a. Our moulds are Procurement of raw materials, high cost of parts manufacturing. Mould braces, lower mold core and other parts with high requirements adopt Swiss imported mold steel which has excellent polishing performance and corrosion resistance;The pointed mouth cover adopts the mold imported from Japan, which has high hardness and high wear resistance;The positioning accuracy on the mold structure is controlled within 0.05mm;The mold parts can be freely interchanged, and the positioning length is greater than 45mm on average;The surface is treated with imported coating process. Greatly improved the service life of the mold, the service life is more than 15 million times (except for wearing parts)
b. The upper mold cooling core is made of imported beryllium copper, adding a water barrier, and the cooling water enters from the middle to make the cooling water fully contact with the beryllium copper parts，which the cooling efficiency is more than 20% higher than that of ordinary mold cooling structure, and the equipment capacity is increased by 20%.
c. The repeat positioning accuracy of the mold is controlled by the structure itself. The installation or removal and maintenance of the upper mold part of the mold only need to disassemble and disassemble the top two M10 screws, and the mold maintenance or replacement is quick and convenient.
10. The advantage of Electric
a. Our Low voltage electrical is ABB which is high quality; stable performance and low failure rate，service points around the world, easy procurement and replacement，complete safety certification.
b. Frequency converter uses DANFOSS which high reliable quality, stable performance and less failure rate; there are service points around the world, the food industry has extremely high utilization rate, easy to purchase and replace; complete safety certification, built-in filter, reactor, and low interference to the power grid;
c. Wire / cable / connector uses famous brand, which complys with national standards, CE, CUL and other standards, copper wire uses pure copper; has EU ROHS environmental protection certification; wire is tinned, wire joints are silver plated, and it is not prone to oxidation.
d. Temperature Control System uses Simon,Reliable, good performance, strong anti-interference ability, high precision, complete certification, simple purchase and replacement
e. Our machine design is according to CUL, CE, GB and other standards; with safety circuit protection; each door has a safety door lock installed which ensure the safety of human being and machine.
f.Program operation is according to PACKML standard writing which is easy to learn.