Automatic Plastic Cap Lid Bottle Cover Liner Cutting Punching and Inserting Machine Coil Die Cutting

We always believe that one's character decides products' quality, the details decides products' high-quality, together with the REALISTIC, EFFICIENT AND INNOVATIVE crew spirit for Compression Moulding for Caps for sale, Cap Molding Machine, Rotational Closure Moulding Process for sale. We are equipped with professional quality inspection personnel to closely monitor and control the quality of the whole production process and every product exported. We always adhere to the spirit of R&D and innovation and the purpose of continuously improving product quality. We hope to cooperate with new and old customers and friends to help each other, sincerely cooperate and create brilliance! We offer diversified products and excellent service to our customers, and insist on the enterprise tenet of "Higher, Newer, Stronger".

Plastic Cap Making Machine is used to making the particles of plastic to the bottle caps of carbonated beverage and mineral water by high temperature plasticizing.When the plastic was out of the extruder,the Scraper plate will cutting the raw material putting them into the molding chamber uniformly.The bottle cap making by this type of machine will be without Injection gate and have excellent quality and beautiful appearance.

After repeated experiments, we have successfully developed the hydraulic Plastic Cap Making Machine ,bottle cap compression molding machine,which is got a set of hydraulic reciprocating transmission device and making the stabilize of  the mold’s hydraulic transmission and convenient operation. In addition,this machine with a complete system of computer automatic temperature control and rotate speed matching between extruding machine and molding machine. The mold temperature and material temperature can be adjusted to best state, to ensure the durability and stability of the equipment.


This machine is not only saving electricity, saving raw materials and but also saving labor . Compared with injection molding machine system of traditional craft have same energy consumption, the production can be growth to three or four times. This machine not only won't produce waste runner, and the mold of the cooling water and hydraulic oil are recycled, thus greatly reduces the system cost.Development to the success of the Plastic Cap Making Machine is making a breakthrough and innovation in the molding equipment.

The machine makes sodas and mineral water bottle caps from granular plastic raw material which is fed via the hopper,plasticized with high temperature, and then forms die block that is extruded from the discharge outlet of the extruder,cut with the cutting tray, uniformly distributed into each mold cavity and finally mold pressed.

一、Why choose us ?

1. Safety Assurance

Established in 2008，We have more than 10 years rich experiences in Plastic Cap Making Machine,cap compression molding machine.As the pioneer of cap compression molding machine in China,we have wined the certifications of UL,ISO9001 :2015 and other 100 national patents like State Torch Project,State Innovation Foundation Project etc.

2. Professional engineer

We have our own professional R&D team led by professor,senior engineer who are dedicated to researching continuous compression moulding technology with high efficiency and energy conservation and makeing exclusive cap design.Every year,we spend 10%-20% of profit on researching.Continuous development,continuous progress.

3. Sales team

Our mission is to create value for customers.We have our professional sales team,who had learned professional knowledge about cap compression molding machine ,served for customers with professional quality,responsed within 24 hours.The would make comprehensive solution of cap production and make plant planing and design.

4. After- service

Our Plastic Cap Making Machine is 1 year warranty and we would provide life-long spare.Our after-service staff response within 24 hours,also before we deliver the goods,our technology team spread the training skills to your employees.By the way,we provide machine updating service.The progress we made is from our clients’ feedback.Thus,our engineers will re-visit our clients.

二、Products

1. Specification:

2.Application:

Mineral water plastic closure making machine,beverage plastic closure making machine,dairy plastic closure making machine,liquor cap molding,condiment cap molding,cosmetics plastic closure making and pharmaceutical closure moulding.

Plastic closure styles:3025,2925,PCO 1881,PCO 1810,2622,38mm,45mm and 48mm plastic bottle cap

3.The advantage of cap compression molding machine:

A.Rotary muti compression molding process and advanced hydraulic system bring the highly stable and accurate production.

B.Muti-cavity continuous high speed rotation, short cycle time, and high production efficiency.

C.Low energy consumption in heating and cooling process.No hot runner, save energy effectively.

D.No raw material wasted in spilling and hot runner circuit, Every single granule of raw material is fully used.

E.Safe machine door interlock,emergency stop switch,rigid machine housing, all of our machine are passed the certification of U/L.

F.Fully automatic in line production, no hand touching, avoid contamination.

4.Compared with injection moulding machine and other Plastic cap compression moulding machine manufacturers,Jeepine’s Plastic cap compression moulding machine have the following advantages:

Plastic cap Compression moulding technology as a well known technology around the world in plastic cap production.

A、Energy saving

Less Energy Consumption,Overall energy savings per cap can be as high as 45%.

Because plastic cap compression moulding machine need lower heating temperature,which means less energy consumption in both heating and cooling.

B、High specific density and less shrinkage

Equal molding pressure, lower molding temperature allows the result of a higher density. Furthermore, less heating and cooling temperature gap accomplish less shrinkage of caps.

C、Quick color changeover without hot runners,only the extruder and independent cool plus mould contact the material .

D、Shorter cycle time (2 seconds) and therefore higher productivity

Due to lower extrusion temperature, caps are more quickly to be cooled down in cool plus mould.It makes shorter cycle time, thus capacity rises.

E、Easy and flexible maintenance

Independent mould make it easier to change mould, only with hand tools but not crane.

F、Less material waste:much lower costs per cap.

Our Mold Advantage:

Advantages of cap compression mould:

1、High Quality

All of mold are processed by ourselves,we have professional engineers to ensure the mold quality .The major cap mold material has excellent wear resistance, high corrosion resistance and high machinability, high coating hardness.

2、High Precision

All the molds can precisely meet the dimension tolerance of caps.

3、Customer-Oriented

Jeepine has professional manufacture equipment for the Plastic cap compression moulding machine, dedicated to mold design and development, absolutely cope with your needs.

All in all ,Our  Mould braces, lower mold core and other parts with high requirements adopt Swiss ASSAB STAVAX ESR.  Has excellent polishing performance and corrosion resistance;The pointed mouth cover adopts Japanese Datong DC53, which has high hardness and high wear resistance;The positioning accuracy on the mold structure is controlled within 0.05mm;The mold parts can be freely interchanged, and the positioning length is greater than 45mm on average;The surface is treated with imported coating process.  Greatly improved the service life of the mold, the service life is more than 15 million times (except for wearing parts).    Procurement of raw materials, high cost of parts manufacturing.

Compared with other company,their precision of the mold structure is low, generally around 0.1mm, the mold parts are almost not interchangeable, the parts are short, and the positioning length is generally less than 25mm.  Resulting in a low die life.Low manufacturing cost.

三、Our factory

四、Our customers

五、Our exhibition

We can constantly satisfy our respected customers with our good high quality, good price tag and good support due to we have been additional specialist and extra hard-working and do it in cost-effective way for Automatic Plastic Cap Lid Bottle Cover Liner Cutting Punching and Inserting Machine Coil Die Cutting. We adhere to the tenet of quality for survival and innovation for development, and vigorously introduces domestic and foreign talents, technology and production equipment. We always adhere to the strategic development of promoting production with technology, creating brand with quality, and promoting market development with brand, so as to realize scientific management.