Add:C4 Building of Scientific & Technological Enterprise Accelerator, 11# Kaiyuan Avenue, Science Town of Luogang Development Zone, Guangzhou, China
Plastic Cap Compression Molding Machine
1. Product name: plastic cap manufacturing machine 2.Product specification: 3.Feature: A.Rotary muti compression molding process and advanced hydraulic system bring the highly stable and accurate production B.Muti-cavity continuous high speed rotation, short cycle time, and high production...Chat Now
Plastic Cap Compression Molding Machine
1. Product name: Plastic cap manufacturing machine
● Machine Model: CCM-JP24 Cavity Number: 24.
● Cap material: HDPE/PP Average production rate:400pcs/min
3.Plastic cap compression moulding Merits:
5.Jeepine company introduction:
7.Jeepine International Exhibitions:
8. Customer case:
Meng Niu Group, Chinese native famous and leading dairy product manufacturer. In China, it's a well-known brand all around the country. It has been the top company in sales volume for consecutive years.
At present, Mengniu is using four Jeepine bottle cap production lines, including 38mm aspetic cap and 41mm sterile cap compression moulding production line.
9. Jeepine Event:
In June,2018, Ghana National Business Delegation Visited Jeepine Intelligent Compression Molding Machine and discussed on the prospect and future cooperation in Ghana plasitc cap compression moulding industry.
Visitors include: Municipal Chief Executive Officer, Deputy Ambassador Ghana Embassy in Beijing,Head of intelligence office of the president,Municipal presiding member, Government appountee,Municipal planning officer,etc.
Municipal Chief Executive Officer, Mr. Albert admired Jeepine's insistence on plastic cap compression moulding technology explanation, and expressed the friendship between Ghanaian Delegation and Chinese enterprises.
In both Injection mold and compression mold, Mold is most important part, which can be said as “heart” of the cap making machine. The plastic cap machine which can be running stably for long time is because of good quality raw material and high precision plasitc cap compression moulding. There is no doubt to say that the quality of cap compression mould already decided 80% quality of cap.
As we known, even the good quality of compression mold, there are some problems happened when be the production. Then bottle cap making machine manufacturer need to assemble or disassemble the plastic cap mould when issues happened. They have to maintain compression cap mould, change the plastic cap mould when production line produce difference kinds of caps.
Therefore, we must consider the difficulty situation of changing mold.
If we can change the cap mold easily, it will greatly increase the production efficiency.
Let us see the injection mold, the following is a 48-cavity bottle cap mold, we can see that the mold is divided into two parts before and after the mold, there is a notable feature is that both front and rear mold, all mould cavities are assembled together, that is, if one of the cavity problems, such as mold rubbing, mold leaking, the top of the imbalance, the entire mold must be removed from the machine, it takes at least a day for disassembling the whole mold in order to remove the problem cavity.And then replace the spare mold, it will take a day to assemble a complete set of mold and the mold is installed on the machine and pick up all the water. The whole process is very cumbersome workload.Even overtime to deal with, it is impossible to resume production at least two days. Because the injection mold complex structure, assembly and disassembly tedious, such as accidentally installed a component but failed to find the error, resulting in reassemble and disassemble mold and the upper and lower mold several times, Toss back and forth, this is not impossible, we believe that people who have done more or less have had this experience.
Let us analyze the compression mold, the following is a 24-cavity capping machine turntable, we can see its remarkable feature is that each mold is independent of each other, do not interfere, see the following figure. If one of the molds leaks or other abnormalities, we can very easily and easily remove the mold from the machine line, see the following steps:
As we can see, the compression mold is much simpler than the injection mold. In general, the loading and unloading time of a single mold on the compression molding machine is no more than 10 minutes. Therefore, when dealing with abnormal mold, mold maintenance, The advantages of plastic compression mold better than injection mold. On the other hand, the injection mold is very large and weight is around several tons. The crane must be used to lift the mold. The compression mold needs only manual installation. This is another significant advantage of the compression mold.
After comparing with injection molding and compression molding, I believe we have a very clear idea of mind, if the selection of compression molding process, the future in the production process of mold replacement is very convenient, downtime Will be greatly shortened, the machine operation efficiency increases, and without spending a lot of money to install the crane, saving investment of equipment.