PCO1881 Compression Making Machine
The carbonated beverages that are currently seen on the market, such as Coca-Cola, Pepsi, Sprite, Qixi, Mei Nida, Jianlibao, Asian Shady, etc., are mostly made of 1881 single-piece lids. Quantitative, smooth and beautiful lines, good sealing performance, excellent thermal stability and so on.
A bottle cap, the primary task is to seal, the purpose is to isolate the beverage inside the bottle from the outside world, reduce the risk of external mold infection, and slow the dissipation of gas inside the beverage. The 1881 single-piece cover produced by Guangzhou Jingpin Packaging Machinery Co., Ltd. does not leak under the pressure of 7kg/cm2. Under the high pressure of up to 12kg/cm2, the bottle cap will still not be detached from the bottle mouth, far exceeding the market. The gas pressure required for carbonated beverages (about 4-5kg/cm2) also meets the industry standard for caps.
Products:
The automatic compression molding and capping machine adopts the upper and lower multi-mode high-speed rotary compression molding process to manufacture plastic bottle caps such as water beverage cover, medical cover, daily lid and wine cover. The granular plastic raw materials (such as PE, PP, etc.) are melted at a high temperature and then quantitatively extruded from the nozzle through an extruder, and then cut and evenly distributed into the respective cavity by the cutting tray, and finally pressed and formed in the cavity.
Technical specifications | CCM-JP24D | CCM-JP24E | CCM-JP36E | CCM-JP48E |
Raw materials | PE/PP | PE/PP | PE/PP | PE/PP |
Maximum nominal diameter of the cover | Φ52mm | Φ36mm | Φ52mm | Φ36mm |
Cover maximum nominal height | 25mm | 25mm | 25mm | 25mm |
Cover maximum nominal weight | 7.2g | 2.5g | 7.2g | 2.5g |
Number of cavities | 24 cavities | 24 cavities | 36 cavities | 48 cavities |
Maximum output | 28.000Pcs/h | 40.000Pcs/h | 60.000Pcs/h | 90.000Pcs/h |
Voltage / frequency | 380V / 50Hz | 380V / 50Hz | 380V / 50Hz | 380V / 50Hz |
Machine size | 4.2*1.9*2.2m | 4.2*1.9*2.2m | 8.0*4.2*2.6m | 9.5*4.2*2.6m |
Machine weight | 7000kg | 7000kg | 15000kg | 16000kg |
Application:
Mineral water cap , juice closure , milk bottle , pharmaceutical bottle
and liqour plastic bottle and so on.
The features of 1881mm Compression Making Machine:
More stable: the continuous compression molding process, the new high-precision double-pump hydraulic system, PID operation control low-pressure clamping high-pressure molding, the operation process is more stable;
More efficient: new high-speed feeding system, multi-mode continuous high-speed spinning, vacuum adsorption type, high production efficiency;
More energy-saving: the polymer melts at a low temperature, and the energy consumption for heating and cooling is low.
More material: intelligent temperature-controlled extrusion, quantitative cutting of pellets, stable weight, no runner waste, no flash, and full utilization of raw materials.
More secure: intelligent logic control system, remote online monitoring, alarm, automatic diagnosis, automatic protection.
More hygienic: It can realize the integrated scheme of cover, blowing, irrigation and spinning, online capping, connecting and conveying, clean and hygienic.
More reliable: through the German Rheinland ISO9001: 2015 quality management system certification, through the US UL certification, the entire process of quality testing, quality control.
Our company：
Guangzhou Jeepine Intelligent Compression Molding Machine Co., Ltd is one of the leading manufacturer of Cap compression molding machine.Established in 2008,Our factory has covers an area of 3000 square meters and we have our own a professional R&D team who are CAE academicians and overseas returnees. Our unique technologies have been applied to our Cap Compression Molding Machines,focusing on energy saving , high efficiency ,high precision,high stability and sanitation.All of our moulds are processed by ourselves.Meanwhile,Jeepine have wined the certifications of UL,ISO9001 :2015 and other 100 national patents like State Torch Project,State Innovation Foundation Project etc.
Why us :
1. We have more than 11 years old exporting experiences.
2. All of machine moulds are processed by ourselves with precision instruments to process ,inspect and test.
3. High stability,high quality,more precision,high capacity.
4. Romote control system,equipment failure warning and equipment failure diagnose.
5. After you purchased our products, our machine engineers will go oversea to train your employees skills ,updating the machine, test the machine.
6. Prompt response,best after-sales service.
Our factory:
Our clients：
Hot Tags: PCO1881 Compression Making Machine, China, manufacturers, suppliers, factory, customized, Cap Compression Molding Machine, Plastic Bottle Cap Making Machine, Plastic Compression Molding Machine for sale, Water Bottle Capping Machine, Jeepine Bottle Cap Compression Machine, Cap Moulding Machine for sale