Basic Info
Model NO.: CCM-JP24
Structure: Vertical
Plasticizing Way: Screw Type
Automation: Automatic
Certification: CE,UL, ISO9001:2015
Tie Bar Sizes: 560*530mm
Open Stroke: 505mm
Trademark: Jeepine
Specification: ISO9001, SGS, UL
HS Code: 8422309090
Type:cap compression
Plastic Type: Thermoplastic
Clamping Way: Hydraulic & Mechanical
Computerized: Computerized
Shot Weight: 507-730gr
Mold Height: 200-560mm
Screw Speed: 190rpm
Transport Package: standard packing
Origin: China,Guangzhou
Product Description
plastic cap compression molding machine
Production capacity 24000 to 80000pcs/h.
Cap diameter: 20 to 48mm
cap height: 10- 30mm
cap material: PP/HDPE/LDPE
Equiped with servo motor, which energy saving by 60% in average ,with longer working life (low oil temperature),low noise ,high precision (close looped system ).
Technical specifications;
Standard equipment:
1) Double cylinder balancing injections
2) High-torque oil-motor preplasticizing
3) Five pivots minus relief angle, double toggles, machine hinge
Mold locking
4) Cabinet-type holder integrates the mold plate
5) Oil motor driven gear mold adjusting
6) Storage-type grease lubricating
7) Pressure and flow whole-proportion running
8) High-performance, low-noise oil pump
9) Multi-step pressure and speed adjusting
10) High-precision position linear transducer
11) Digital memory for mold group
Injection unit:
1) Four injection pressures and speeds with three additional
Pressures and speeds
2) Suck back function
3) Cold start protection
4) Pre-suck back function
5) Linear displacement transducer accurately monitor injection
Position, providing optimum. Injection accuracy and control
6) Temperature control
7) Heating Status indication
Compression unit:
1) Three clamp close and open pressures and speeds
2) Mold protection function
3) Hydraulic ejector stroke controlled by transducer
4) Automatic hydraulic die-height adjustment driven by planetary
Gears system
5) Adjustable support under moving platen
6) Automatic high pressure toggle lubrication with low oil level alarm
7) Mechanical, electrical and hydraulic safety interlock devices
8) Linear displacement transducer controls clamping position
Other parts:
1) Independent core in / out pressure and speed
2) Hydraulic unscrewing sequence
3) Hydraulic oil high temperature alarm
4) System pressure gauge
5) Shot counter and reset function
6) Malfunction alarm light
7) Self-diagnostic function
8) Emergency stop buttons placed both front and rear of the machine
To provide easy access